JAPAN CARLIT

SOLID ELECTROLYTE CAPACITOR

Aluminum Electrolytic Capacitors

with Polypyrrole SOLID Electrolyte

Manufacturer : Japan Carlit Co.,Ltd. - Tokyo, Japan

	For SMD (Surface Mounted Devices)
	Low Impedance & Low ESR at High Frequency
	High Ripple Current Capability

CONSTRUCTION OF "PC-CON"

CAPACITANCE / WORKING VOLTAGE LIST

W.V	2		2.5		4			6.3			10	16
uF/series	SXB	S W	SXB	S W	S L	SXB	S W	S L	SXB	S W	S L	S L
2.2	-	-	-	-	-	-	-	-	-	-	-
4.7	-	-	-	-	-	-	-	-	-	-		-
10	-	-	-	-	-	-	-		-	-	-	-
15	-	-	-	-		-	-	-	-	-	-	-
47	-	-	-	-	-	-	-	-		-	-	-
68	-	-	-	-	-		-	-	-	-	-	-
82	-	-		-	-	-	-	-	-	-	-	-
100		-	-	-	-	-	-	-	-		-	-
150	-	-	-	-	-	-		-	-	-	-	-
180	-	-	-		-	-	-	-	-	-	-	-
220	-		-	-	-	-	-	-	-	-	-	-

Commercial available

DIMENSIONS

　

Series	L	W	H	S	W1
SL	7.3	4.3	1.4	1.3	2.4
SXB	7.3	4.3	1.9	1.3	2.4
SW	7.3	4.3	2.7	1.3	2.4

( unit : mm)

Series System Diagram

SL Series : The standard capacitance with low height of 1.4mm
SXB Series : The high capacitance and low E.S.R. with the height of 1.9mm
SW Series : The higher capacitance and lower E.S.R. with the height of 2.7mm

Specifications

Series		SL	SXB	SW
Operating temperature range ()		-55 to +105
Rated voltage range (V.DC)		4 to 16	2 to 6.3	2 to 6.3
Nominal cap. range (µF)		2.2 to 15	47 to 100	100 to 200
Capacitance tolerance (120Hz/20)		20%
Leakage current (after 2minutes) (uA)		0.04CV
Tangent of loss angle (tan ) (120Hz/20)		0.05		0.1
Equivalent series resistance (E.S.R.) (m) (100kHz/20)		50	13	10
Maximum allowable ripple current (mA rms)		1900	3000	3500
Surge voltage		Rated working voltage1.3
High temperature load (+105, 2000hrs, Rated voltage applied)	C/C	Within 20% of initial measured value (20)
	tan	150% of initial specified value(20)	200%	150%
	LC	initial specified value (20)
Moisture resistance (+60, 90-95%RH, 500hrs, No voltage)	C/C	Within -20% to 40% of initial measured value (20)
	tan	150% of initial specified value (20)		200%
	LC	300% of initial specified value (20)

IN COOPERATION WITH SUZUKI TECHNO

DOWNLOAD CATALOG